Function
TAP (see table 1 for types) is a device transmitting signals with little loss and certain attenuation used in signal integration and distribution circuit of CATV system and other GCATV systems. It is anti-electromagnetic.

Specifications
TAP parameters

6-way, 8-way TAP parameters

Item		Unit	Parameters
			6-way			8-way
Freq. Range		(MHz)	47-800
Splitting loss （dB）	Nominal	dB	16	20	24	16	20
	Allowed error		±1.5
Insert loss		dB	≤3.5	≤3	≤3	≤5	≤3.5
Return isolation		dB	≥21	≥25	≥29	≥21	≥25
Inter-isolation		dB	≥18
Reflection loss		dB	≥12

Dimension and weight

Item	TYPE	Dimension（mm）	Weight（g）
1-way TAP	FZL1	55*46.5*21	45
2-way TAP	FZL2	55*46.5*21	45
3-way TAP	FZL3	55*46.5*21	90
4-way TAP	FZL4	77*46.5*21	90
6-way TAP	FZL6	120 *46.5*21	160
8-way TAP	FZL8	160 *46.5*21	200

Interface
Socket impedance　75Ω
Type　FL10

■ Splitter Introduction

Function
Splitter is a passive device used to split one way TV signal into several ways output. It is used in output end of an amplifier to split one main trunk into several branch lines ， and distribute signal to subscriber. It is adopted in CATV system, and also can be used as return signal mi*ing device. It is anti-electromagnetic

Specifications

FPL6/11-1 Splitter Parameters

Item	Unit	Parameters
Freq. Range (MHz)	(MHz)	47-800
Distribution loss	dB	≤11
Inter-isolation	dB	≥18
Reflection loss	dB	≥10

TFPLΔ/Δ–3 Splitter Parameters

Item		Parameters
Freq. Range (MHz)		5-47	47-550	550-800	800-1000
Splitting loss (dB)	2-way	≤4	≤4	≤4	≤4.5
	3-way	≤6	≤6	≤6	≤6.5
	4-way	≤8	≤8	≤8	≤8.5
Inter-separation (dB)	2-way	≥22	≥22	≥22	≥20
	3-way	≥22	≥22	≥22	≥20
	4-way	≥22	≥22	≥22	≥20
Reflection loss (dB)	2-way	≥12	≥16	≥16	≥10
	3-way	≥12	≥14	≥14	≥12
	4-way	≥12	≥16	≥14	≥12

Dimension and Weight

Item	TYPE	Dimension (mm)	Weight (g )
2-way splitter	FPL2/4-3	55*46.5*21	50
3-way splitter	FPL3/6.5-3	55*46.5*21	54
4-way splitter	FPL4/8-3	77*46.5*21	80
6-way splitter	FPL6/11-1	120*46.5*21	160

Interface
Socket impedance　75Ω
Type　FL10.